Lockout Tags

All Materials Manufactured in North America

"Lock Out Tags" refers to specific practices and procedures to safeguard employees from the unexpected energization or startup of machinery and equipment, or the release of hazardous energy during service or maintenance activities.

Danger tags prevent accidents by alerting workers to potential dangerous situations.

• Constructed from 9.5 mil synthetic tag stock
• Puncture-, fade-, chemical- and weather-resistant
• Standard hole size is 3/16"
• Available with optional 3/8" brass grommet
• Plastic locking ties are included
• 2-sided, with your choice of tag back (see choices)

• Do Not Close This Valve
• Do Not Drink This Water
• Do Not Freeze
• Do Not Move
• Do Not Open This Valve
• Do Not Open Valve Unless Authorized
• Do Not Operate Electricians At Work
• Do Not Operate Maintenance Department
• Do Not Operate Unless Safety Guard Is In Place
• Do Not Operate Without Ear Protection
• Do Not Operate Production Department
• Do Not Remove This Tag, Do Not Throw Switch, Men Working on Machinery

• Do Not Remove This Tag To Do So Without Authority Will Mean Immediate Discharge It Is Here For A Purpose
• Do Not Stack
• Do Not Start
• Do Not Start This Motor
• Do Not Throw Switch Mem At Work On Circuit
• Do Not Touch
• Do Not Use Near Electrical Equipment
• Electrical Hazard
• Electrical Hazard (with graphic)
• Electrician Working On Line Do Not Touch Switch
• Equipment Not Operating Property Do Not Start
• Hands Off Do Not Operate Until This Tag Is Removed By _______

• High Voltage
• High Voltage (with graphic)
• Hot
• Keep Fingers Clear of Machine While In Motion
• Keep Hands Clear While Machine Is Operating
• Lock Out Before Servicing
• Lockout Equipemtn When Done
• Automatic Equipment May Operate Without Warning
• Condemmed Do Not Use Until This Tag Is Removed
• Danger (Blank)

Caution tags help to identify potentially dangerous situations which may, if not avoided result in injury to your workers. Keep them safe!

Use these tags on valves, switch boxes, machinery or wherever precautions should be taken.

• Constructed from 9.5 mil synthetic tag stock
• Puncture-, fade-, chemical- and weather-resistant
• Standard hole size is 3/16"
• Available with optional 3/8" brass grommet
• Plastic locking ties are included
• Back side is solid yellow

• Blank
• Current On
• Disconnect Before Servicing
• Do Not Close This Valve
• Do Not Drink This Water
• Do Not Operate Electricians At Work
• Do Not Operate Maintenance Department

• Do Not Operate This Switch
• Do Not Operate Without Ear Protection
• Do Not Operate Without Eye Protection
• Electrical Mechanical Reason Tagged
• Fiber Optic Cable
• Hands Off Do Not Operate
• Keep Out

• Lockout Before Servicing
• Mem Working On Machinery
• Operation Off This Equipment is Restricted to The Following Personnel:
• Stop Machinery To Clean To Oil To Repair
• Unsafe Do Not Use

Warning tags help identify potentially hazardous situations which if not avoided may result in death or serious injury to your workers. Keep them safe!

Use these tags on valves, switch boxes, machinery or wherever precautions should be taken.

• Constructed from 9.5 mil synthetic tag stock
• Puncture-, fade-, chemical- and weather-resistant
• Standard hole size is 3/16"
• Available with optional 3/8" brass grommet
• Plastic locking ties are included
• Back side is solid orange

• Blank
• Disconnect Machinery Before Servicing
• Do Not Close This Valve
• Do Not Move
• Do Not Remove This Tag
• Do Not Throw Switch
• Flammable

• If Problems Develop With This Equipment Notify The Supervisor
• Keep Out
• Read Directions Before Operating
• Unsafe Do Not Use
• _____Volts

2012, Full-Line Catalog - Products, Consulting, Support

On demand labels, tags and decals; hazard class and shipping name labels, placards, publications, training material, UN packaging, new infectious packaging, and more!